PT Wahana Prestasi Logistik (Wahana Express) 
PT APM Hyundai Transys Indonesia 
PT Bersama Zatta Jaya Tbk (Elcorps) 
PT Graha Karya Informasi 
PT Meitech Eka Bintan 
PT Triagung Jaya Abadi (EPC) 
PT Omron Manufacturing Of Indonesia 
PT Tamaris Hydro 
| Tanggal Dipublish | : | |
|---|---|---|
| Pendidikan | : | D3, D4, S1 |
| Jurusan | : | Fisika, Komputer, Teknik Elektro, Teknik Kimia, Teknik Listrik, Teknik Mesin |
| Lokasi | : | Kupang, NTT, Sulawesi Utara |
| Tipe Pekerjaan | : | Full Time |
| Pengalaman | : | 1 - 10 Tahun |
Lowongan Kerja – PT Medco Power Indonesia adalah perusahaan energi yang didirikan pada tahun 2004 dan merupakan bagian dari PT Medco Energi Internasional Tbk. Sebagai Independent Power Producer (IPP), MPI mengembangkan, memiliki, dan mengoperasikan berbagai pembangkit listrik di Indonesia, dengan total kapasitas mencapai lebih dari 3.100 MW. Portofolio energinya mencakup pembangkit berbahan bakar gas alam, panas bumi, tenaga surya, dan tenaga air, menjadikannya salah satu pemain penting dalam transisi energi bersih di tanah air.
Dengan visi menjadi pemimpin dalam penyediaan listrik yang andal dan berkelanjutan, MPI terus memperluas investasinya di sektor energi terbarukan. Proyek-proyek strategis seperti PLTP Blawan Ijen dan PLTS Bali mencerminkan komitmen perusahaan terhadap keberlanjutan dan target Net Zero Emission. Melalui kerja sama nasional dan internasional, serta dukungan sumber daya manusia yang kompeten, MPI berkomitmen menghadirkan solusi energi yang inovatif dan ramah lingkungan bagi masa depan Indonesia.
Baca: Info Lowongan Kerja untuk Lulusan Baru
Sumber Daya Manusia (SDM) merupakan asset yang sangat berharga atau sebuah investasi besar yang akan menjadi faktor utama yang menentukan suatu keberhasilan sebuah perusahaan/instansi. Pengelolaan Manajemen Sumber Daya Manusia (MSDM) yang tepat bagi sebuah perusahaan/instansi akan menjadi faktor utama dan membawa kesuksesan yang maksimal. Kreatifitas dan dedikasi para ahli dibidangnya adalah kunci keberhasilan sebuah perusahaan/instansi. Apresiasi yang tinggi atas kontribusi para karyawan menumbuhkan lingkungan kerja yang produktif, inovatif, kreatif dan dinamis.
Maka dari itu PT Medco Power Indonesia kembali membuka rekrutmen lowongan kerja terbaru untuk sejumlah posisi yang dibutuhkan. Calon kandidat yang memenuhi kualifikasi, memiliki semangat dan dedikasi yang tinggi serta keinginan untuk berkembang meningkatkan keterampilan dan pengalamannya. Berikut adalah posisi dan kualifikasi lowongan yang tersedia pada saat ini.
Lowongan Kerja PT Medco Power Indonesia
1. Electrical Engineer
Job Description :
- Design and develop electrical systems for power plants, including generation, distribution, and control systems.
- Conduct feasibility studies and technical assessments for new projects.
- Experiences in various types of power plants: Combine Cycle Power Plant, Solar PV Power Plant, Gas Engine Power Plant, Hydro Power Plant, and Geothermal Power Plant
- Detailed knowledge in generators, excitation systems, governor systems, SCADA, PLC, Emergency Diesel Generators, inverters, rectifiers, UPS systems, grounding system, and lighting system
- Able to do and review electrical studies such as load flow study, short circuit study, protection study, transient study, ARC flash study, grounding study, and lightning protection study
- Experience in high voltage substation systems either Air Insulated System (AIS) or Gas Insulated System (GIS), including relay control panel (RCP), Substation Automation System (SAS), Power Transformer, Circuit breaker, Current transformer, and Voltage Transformer.
- Familiar with IEC standards and PLN Grid Code
- Ensure compliance with industry standards and regulations.
- Perform system performance monitoring and optimization.
- Troubleshoot and resolve electrical issues in power plant operations.
- Collaborate with other engineering disciplines and project teams.
- Prepare detailed technical reports and documentation.
Qualifications :
- Bachelor’s degree in Electrical Engineering. Other disciplines will only be considered if the candidate has proven working experience as an Electrical Engineer in the past 10 years. Master’s degree is an advantage
- Minimum 10 years of experience as an Electrical Engineer, preferably in the Power Utility industry.
- Proficiency in electrical design software and tools.
- Strong knowledge of power generation, distribution, and control systems.
- Excellent problem-solving and analytical skills.
- Ability to work effectively in a team environment.
- Strong communication and interpersonal skills.
- English proficiency is mandatory
2. HSESS Manager (CFPP – SULUT 1)
3. Operation Manager (CFSPP Sulut-1)
Job Description :
- To ensure that the plants are always at its optimum capacity by continuously evaluating its performance, system design, operations and maintenance methods associated with health, safety, and environmental standards.
- Supervise development and implementation standard procedures and practices for the plant operation and maintenance.
- Monitor, analyze, and evaluate plant performance in terms of efficiency, productivity, reliability, availability, health, environment, and cost.
- Conducting review and recommend changes in operation and maintenance methods and in design of system, equipment or components to maximize assets life, minimize operating cost and optimize performance and strengthen health, safety and environmental standards
- Maintain the performance of existing plant operation and maintenance standards and benchmark against best practice.
- Ensure emerging technologies and materials to ensure that power plant operation and maintenance standards are aligned to best industry practice;
- Evaluates the training needs of the maintenance personnel and coordinate with HR
Requirements :
- Bachelor degree of Electrical/Mechanical/ Chemical Engineering
- Experience in PLTU Operation min 7 years
- Having Project Management Skills
- Having strong Leadership
- Good computer skills, be able to operate Microsoft Office, and any related power plant software
- Good communication skill both verbal and in writing, specifically in English language
- Willingness to relocate in Bolaang Mongondow, North Sulawesi
4. Material Handling Supervisor (CFSPP TIMOR-1)
Job Description :
- Assist Make improvements under the Operator Leader approval of the engines and their support equipment
- Assist in recording and observing material handling and Fly ash operation parameter data and reporting to superiors in case of equipment interruption
- Periodic monitoring of supporting equipment in the field
- Prepare the supporting data for the manufacturing of enginery operation report
- Coordination and cooperation with Unit controller regarding Coal Consumption and Coal supplier
- Provide maximum support in achieving production targets
- Responsible for Security, Safety, Health and Environment of work area
Job Requirements :
- Bachelor degree in Electrical / Mechanical /Chemical Engineering
- Have knowledge of Operation in Coal Fired Power Plant.
- Fluently both speaking and written in English
- Minimum 3 (three) years experience as Operator in Coal Fired Power Plant
- Willing to be place in our operational area, Kupang, East Nusa Tenggara
5. Unit Supervisor (CFSPP TIMOR-1)
Job Description :
- Assist Make improvements under the Operator Leader approval of the engines and their support equipment
- Assist in recording and observing engine operation parameter data and reporting to superiors in case of equipment interruption
- Periodic monitoring of supporting equipment in the field
- Prepare the supporting data for the manufacturing of enginery operation report
- Coordination and cooperation with PLN WRKR or PLN Dispatcher and gas supplier
- Provide maximum support in achieving production targets
- Responsible for Security, Safety, Health and Environment of work area
Requirements :
- Bachelor degree in Electrical / Mechanical Engineering
- Minimum 3 (three) years experience as Operator in Coal Fired Power Plant
- Have knowledge of Operation in Coal Fired Power Plant.
- Fluently both speaking and written in English
- Willingness to relocate in Kupang, East Nusa Tenggara
6. Control & Instrument DCS Supervisor (CFSPP TIMOR-1)
Job Description :
- Assisting M & R Manager in making & implementing plan of activity Maintenance of power plant unit as well as good, especially maintenance and reliability of engine
- Organize Instrument & Control team in case of scheduled and unscheduled maintenance
- Ensure that company policies and systems are clearly understood and implemented effectively and efficiently by each subordinate
- Responsible for Security, Safety, Health and Environment of work area
Requirements :
- Bachelor degree in Electrical Engineer
- Experiences Minimum and 5 (years) years experience as Engineer at Power plant
- Experience in the electrical maintenance especially in Coal Fired Power Plant
- Have management and leadership skills · Proficient in operating Microsoft office
- Fluently both speaking and written in English · Have the skills and knowledge of Power Plant.
- Willingness to relocate in Kupang, Nusa Tenggara Timur
7. E&I Technician (MGS)
Job Description :
- Perform maintenance work such as overhauling, repair, calibration, and testing of all plant electrical equipment and instruments base on established manufacturer standards;
- Maintain plant calibration database. Perform scheduled calibrations;
- Perform preventive maintenance job on all plant electrical equipment, instruments and DCS control equipment based on established Computerized Maintenance Management System quality standards and schedules;
- Conduct routine inspection and monitoring of all electrical, instrumentation, DCS control system and 150kV line protection system equipment conditions and performs functional check to ensure optimum reliability of the equipment/instrument;
- Report immediately to his superior any indications of abnormal conditions based on established standards set by the department;
- Perform Call-Out and On-call duties as required by operations to minimize or prevent plant downtime;
- Assist the Operations Section during start up, test and initial operation of newly overhauled plant equipment facilities, and ensure that the equipment and control are in good operating condition and optimum reliability;
- Troubleshoot and recommend appropriate actions or solutions to eliminate future reoccurrences;
- Ensure that any instrument or equipment repairs/calibrations performed by outside contractors are within the acceptable standards of the company;
- Assist during conduct of periodic parts and equipment inventory;
Execute installation works of any plants’ facility instrument upgrading or rehabilitation project, if any, as directed by his superior; - Maintain tools and precision instrument or equipment under his responsibility and ensures that they are in good working conditions;
- Monitor contractors’ activities, workmanship and progress to ensure compliance to specifications, standards and agreed work durations;
- Execute health, security, environmental and safety rules and regulations of the company;
- Practice recommended behaviors that adhere to the core values of the company;
- Implement and comply with company rules and policies;
Requirements :
- Graduate of Diploma 3 Degree preferably in Electrical/Computer or Electronics Engineering;
- Minimum 5 years technical experience in power plants or similar heavy industry, experience with geothermal facilities is an advantage;
- Good planning and computer programming skills;
- Good communication and reporting skills both verbal and in writing, specifically in English language;
- Willingness to work weekends, holidays and overtime as necessary;
- Willingness to travel and relocate in Tarutung, North Sumatra;
- Multi-cultural knowledge and working experience.
8. Operation Shift Coordinator (CFSPP Timor-1)
Job Description :
- Organize Operators in recording and observing engine operation parameters
- Set up the Operators assignment at the time of the shift
- Periodic observation of supporting equipment in the field and delegating to Operators
- Compile and summarize logbook of all parameters to Operation Engineer
- Coordination and cooperation with PLN WRKR or PLN Dispatcher and gas supplier
- Responsible to achieve production targets
- Responsible for Security, Safety, Health and Environment of work area
Qualification :
- Bachelor degree in Electrical / Mechanical Engineering
- Have a knowledge of Coal Fired Power Plant
- Experienced in operation of Coal Fired Power Plant
- Have management and leadership skills
- Fluently both speaking and written in English
- Able to operate Microsoft Office and any related Power Plant Software
- Minimum 3 (three) years experiences as Unit Controller CCR of Coal Fired Power Plant
- Willingness to relocate in NTT (Kupang)
9. Technician DCS & Instrument Control (O&M Ijen)
Job Description :
- Perform maintenance work such as overhauling, repair, calibration, and testing of all plant DCS equipment base on established manufacturer standards;
- Maintain plant calibration database. Perform scheduled calibrations;
- Perform preventive maintenance job on all plant DCS equipment, based on established Computerized Maintenance Management System quality standards and schedules;
- Conduct routine inspection and monitoring of all DCS, and 150kV line protection system equipment conditions and performs functional check to ensure optimum reliability of the equipment/instrument;
- Report immediately to his superior any indications of abnormal conditions based on established standards set by the department;
- Perform Call-Out and On-call duties as required by operations to minimize or prevent plant downtime;
- Assist the Operations Section during start up, test and initial operation of newly overhauled plant equipment facilities, and ensure that the equipment and control are in good operating condition and optimum reliability;
- Troubleshoot and recommend appropriate actions or solutions to eliminate future reoccurrences;
- Ensure that any instrument or equipment repairs/calibrations performed by outside contractors are within the acceptable standards of the company;
- Assist during conduct of periodic parts and equipment inventory;
- Execute installation works of any plants’ facility instrument upgrading or rehabilitation project, if any, as directed by his superior;
- Maintain tools and precision instrument or equipment under his responsibility and ensures that they are in good working conditions;
- Monitor contractors’ activities, workmanship and progress to ensure compliance to specifications, standards and agreed work durations;
- Execute health, security, environmental and safety rules and regulations of the company;
- Practice recommended behaviors that adhere to the core values of the company;
- Implement and comply with company rules and policies;
- Perform other related duties that may be assigned by superiors.
Requirements :
- Graduate of Diploma 3 Degree preferably in Electrical/Control & Instrument/Computer or Electronics Engineering;
- Minimum 5 years technical experience in power plants or similar heavy industry, experience with Geothermal facilities is an advantage;
- Good planning and computer programming skills;
- Good communication and reporting skills both verbal and in writing, specifically in English language;
- Having experiences in multi-national project development performed in various countries is desirable but not essential;
10. Control & Instrument DCS Technician (CFSPP Timor-1)
Job Description :
- Implementing unscheduled maintenance
- Maintaining mechanical equipment and supporting equipment
- Responsible for Security, Safety, Health and Environment of work area.
Requirements :
- Bachelor / Diploma degree in Electrical/Physics Engineering
- Experience in the maintenance especially in Electrical System Power Plant
- Proficient in operating Microsoft office
- Fluently both speaking and written in English
- Have the skills and knowledge of Power Plant.
- Work Experiences preferably Minimum 1 (one) year experience as Technician at Power Plant or fresh graduate
- Willingness to relocate in Kupang
Bagi yang berminat dan memenuhi kualifikasi, Silahkan melakukan pendaftaran secara online.
NOTE :
- Proses apply rekrutmen ini dilakukan melalui online.
- Proses rekrutmen dilakukan tanpa biaya (GRATIS!!!).
- Harap hati-hati penipuan yang mengatasnamakan PT Medco Power Indonesia, dan Cakerja.
- Join Group Telegram untuk Update Loker Setiap Harinya di T.ME/CAKERJA
- Batas Lamaran: -
- Link: https://cakerja.com/18375
Perhatian: Kami tidak pernah meminta imbalan atau biaya dalam bentuk apapun terhadap rekrutmen disitus ini apabila ada pihak yang mengatasnamakan kami atau perusahaan meminta biaya seperti transportasi atau akomodasi atau yang lainnya bisa dipastikan itu PALSU.