Tanggal Dipublish	:	16 April 202616 April 2026
Pendidikan	:	S1
Jurusan	:	HSE, Sains, Teknik, Teknik Sipil
Lokasi	:	Jakarta, Sulawesi, Sulawesi Tengah
Tipe Pekerjaan	:	Full-Time
Pengalaman	:	1 - 8 Tahun

Lowongan Kerja – PT Brunel Service Indonesia, bagian dari Brunel International, Didirikan pada tahun 1975, menyediakan tenaga ahli untuk industri minyak & gas, pertambangan, petrokimia, pembangkit listrik, dan konstruksi internasional. Dengan lebih dari 120 kantor dan jaringan yang kuat yang terdiri dari lebih dari 11.000 spesialis di seluruh dunia, kami menyediakan Solusi Proyek dan Konsultasi, Solusi Tenaga Kerja, dan Solusi Mobilitas Global yang mentransformasi proyek-proyek global di bidang Energi Terbarukan, Energi Konvensional, Pertambangan, Ilmu Hayati, Mobilitas Masa Depan, Industri & Teknologi, dan banyak sektor lainnya.

Baca: Info Lowongan Kerja untuk Lulusan Baru

Sumber Daya Manusia (SDM) merupakan asset yang sangat berharga atau sebuah investasi besar yang akan menjadi faktor utama yang menentukan suatu keberhasilan sebuah perusahaan/instansi. Pengelolaan Manajemen Sumber Daya Manusia (MSDM) yang tepat bagi sebuah perusahaan/instansi akan menjadi faktor utama dan membawa kesuksesan yang maksimal. Kreatifitas dan dedikasi para ahli dibidangnya adalah kunci keberhasilan sebuah perusahaan/instansi. Apresiasi yang tinggi atas kontribusi para karyawan menumbuhkan lingkungan kerja yang produktif, inovatif, kreatif dan dinamis.

Maka dari itu PT Brunel Service Indonesia kembali membuka rekrutmen lowongan kerja terbaru untuk sejumlah posisi yang dibutuhkan. Calon kandidat yang memenuhi kualifikasi, memiliki semangat dan dedikasi yang tinggi serta keinginan untuk berkembang meningkatkan keterampilan dan pengalamannya. Berikut adalah posisi dan kualifikasi lowongan yang tersedia pada saat ini.

Lowongan Kerja PT Brunel Service Indonesia

1. Civil & Engineering Manager

This role will take ownership of civil and infrastructure engineering across the mining site, covering both project execution and operational readiness.

The scope includes:

Haul roads, access roads, drainage, and large-scale earthworks
Mine infrastructure (workshops, offices, camps, power stations, laydown areas)
Foundations, concrete structures, culverts, and retaining systems
Site drainage design and management outside active mining areas
Ancillary infrastructure supporting mining and logistics operations
Project management, including contractor and interface management, tendering, and commercial support, while ensuring strong HSE performance and leadership across teams.
Central Sulawesi (site-based)

2. QHSSE Coordinator/ ISO Specialist

The scope includes:

Lead in managing QHSSE systems and ISO compliance, with a strong focus on audit preparation, conducting audits, and reporting.
Ensuring the company is fully aligned with standards such as ISO 9001, ISO 14001, and ISO 45001, and ideally have exposure to ISO 37001 (Anti-Bribery) and ISO 29001 (Oil & Gas).
The position is office-based but will also support ongoing offshore projects, working closely with QHSE teams on site and in the office.
Report directly to the Operations Manager and coordinate with QHSE Officers across multiple functions.
We’re ideally looking for candidates with strong hands-on experience in ISO systems, audit processes, and QHSSE implementation, preferably within oil & gas, EPC, or marine environments.
This is a great opportunity for someone who enjoys building systems, ensuring compliance, and working in a dynamic, multi-project environment.
Jakarta (office-based, with exposure to offshore projects)

3. Commissioning Specialist (I&C)

What are you going to do

Perform detailed technical review of EPC commissioning deliverables related to instrumentation and control systems, including loop folders, instrument data sheets, hook-up drawings, control narratives, cause & effect charts, and system test procedures to ensure readiness for energization and functional testing.
Act as Company Witness for I&C pre-commissioning and commissioning activities such as loop checks, instrument calibration, logic verification, and functional testing, ensuring compliance with approved procedures and project acceptance criteria.
Verify correct installation, calibration, and range setting of field instruments (pressure, temperature, flow, level, analysers), including impulse line integrity, manifold configuration, tubing installation, and instrument air quality prior to live commissioning.
Ensure ICSS/DCS/PLC systems are fully prepared for commissioning, including database loading, tag configuration, I/O allocation, controller redundancy validation, and verification of HMI graphics against as-built documentation.
Review and validate loop continuity, signal polarity, marshalling, grounding/earthing, and cable shielding to ensure signal integrity and minimize noise, drift, or communication faults.
Technically assess and approve I&C commissioning procedures and method statements, ensuring test sequences adequately cover interlocks, permissive, trips, alarms, fail-safe actions, and system recovery logic.
Participate in system walkdowns and loop verification to confirm installation compliance with P&IDs, loop diagrams, JB schedules, cable routing, hazardous area classification, and Ex certification requirements.
Lead and witness cause & effect testing, validating shutdown logic, ESD and F&G system integration, voting logic, and interface signals between ICSS, package units, and third-party systems.
Support dynamic commissioning by monitoring live process signals, verifying control loop tuning, alarm and trip setpoints, transmitter damping, and control valve stroking to ensure stable and reliable process control.
Witness FATs, SATs, and integrated system tests, verifying communication protocols (Modbus, Ethernet/IP, etc.), interface signals, control philosophy implementation, and ensuring documentation is updated to reflect as-built conditions prior to handover.

Essential skills and knowledge

Bachelor’s degree in Applied Sciences or Engineering.
8 years in Instrumentation and Control Systems commissioning activities with at least 3 years in a PMT or supervisory role in Oil & Gas large scale onshore and offshore projects.
Background in Offshore platforms, topsides, is desirable.
In depth knowledge of Instruments and ICSS systems, including DCS, ESD, F&G and PLC’s interfaces.
A strong commitment to safety protocols and procedures in a site environment.
EPC Support expertise for Planning and Execution phases
Strong organizational and technical judgment skills
Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
Make decisions in the general interest while pursuing business results
Excellent communication skills and ability to read, write, and speak fluent English
Proficient in Microsoft Office suite of software programs, Advanced computer literacy.
Good communication and influencing skills

Bagi yang berminat dan memenuhi kualifikasi, Silahkan melakukan pendaftaran secara online

NOTE :

Proses apply rekrutmen ini dilakukan melalui online ATAU email.
Proses rekrutmen dilakukan tanpa biaya (GRATIS!!!).
Harap hati-hati penipuan yang mengatasnamakan PT Brunel Service Indonesia, dan Cakerja.
Join Group Telegram untuk Update Loker Setiap Harinya di T.ME/CAKERJA
Ikuti saluran Cakerja.com di WhatsApp: https://whatsapp.com/Cakerja

Post Views: 55

Apply Now!

Batas Lamaran: -
Link: https://cakerja.com/23871

Perhatian: Kami tidak pernah meminta imbalan atau biaya dalam bentuk apapun terhadap rekrutmen disitus ini apabila ada pihak yang mengatasnamakan kami atau perusahaan meminta biaya seperti transportasi atau akomodasi atau yang lainnya bisa dipastikan itu PALSU.