PT McDermott Indonesia

Lowongan Kerja – PT McDermott Indonesia (PTMI) merupakan perusahaan yang bergerak di bidang jasa konstruksi minyak lepas pantai terbesar di Indonesia dan juga merupakan salah satu yang terbesar di dunia. Aktivitas jasa perkapalan McDermott di Batam berpengaruh besar terhadap produksi McDermott secara global.

PT McDermott Indonesia (PTMI) adalah salah satu anak perusahaan dari McDermott Incorporated. McDermott Incorporated adalah sebuah perusahaan yang menyediakan jasa rekayasa dan konstruksi untuk industri energi.

Baca: Info Lowongan Kerja untuk Lulusan Baru

Sumber Daya Manusia (SDM) merupakan asset yang sangat berharga atau sebuah investasi besar yang akan menjadi faktor utama yang menentukan suatu keberhasilan sebuah perusahaan/instansi. Pengelolaan Manajemen Sumber Daya Manusia (MSDM) yang tepat bagi sebuah perusahaan/instansi akan menjadi faktor utama dan membawa kesuksesan yang maksimal. Kreatifitas dan dedikasi para ahli dibidangnya adalah kunci keberhasilan sebuah perusahaan/instansi. Apresiasi yang tinggi atas kontribusi para karyawan menumbuhkan lingkungan kerja yang produktif, inovatif, kreatif dan dinamis.

Maka dari itu PT McDermott Indonesia kembali membuka rekrutmen lowongan kerja terbaru untuk sejumlah posisi yang dibutuhkan. Calon kandidat yang memenuhi kualifikasi, memiliki semangat dan dedikasi yang tinggi serta keinginan untuk berkembang meningkatkan keterampilan dan pengalamannya. Berikut adalah posisi dan kualifikasi lowongan yang tersedia pada saat ini.

Lowongan Kerja PT McDermott Indonesia

1. Senior Production Engineer (HVAC Discipline)

2. Senior Production Engineer (Coating Discipline)

Responsibilities

• Guide and ensure discipline production engineer to understand the scope of work, and project schedule.
• Review Work Package and ensure issued base on the fabrication sequence and schedule.
• Develop a work pack index and set priorities and align with project schedule.
• Ensure necessary documentation and compliance with procedural requirements throughout the project phases.
• Review material expediting reports and rise any concern to find mitigation and solution of the concerned parties (i.e. PMT, Project Engineer, Project SCM etc.)
• Initiate site/technical queries to resolve fabrication/construction issues with most effective solution.
• Provide field guidance as necessary and ensure compliance with Project and Company specification.
• Attend production meetings and report concerns.
• Identify any changes or additional work from the original scope and initiate change order as required.
• Monitoring discipline level project fabrication progress within schedule and productivity within targeted budget in coordination with project Fabrication Coordinator.
• Responsible for development fabrication four week look ahead including the prioritization of materials and drawings to suit project schedule and provide input to Fabrication coordinator or PMT for any project issues.
• Lead the Discipline Production Engineering team, to coordinate with stakeholders (i.e. Detailing, Construction Engineer, Material Controllers, etc.) to meet project fabrication requirements.
• Establish a productive working relationship with Project Superintendents & Supervisions to ensure meeting the Fabrication Targets.
• Provide input for project constructability program effort for fabrication. Lead project constructability reviews on a discipline level including resolution of construction problems with intra / inter function interfaces and ensure the work execution plan is based on the most productive option.
• Support project Fabrication Coordinator to manage inter / intra–functional interfaces and project reporting requirements like AFC estimate review, subcon coordination, project status reporting, developing fabrication sequence, conducting constructability reviews, etc.
• Supervise discipline Production Engineer and ensure optimal utilization of production engineer resources, including identification of Production Engineer resource needs for the project and communication of these regularly to Fabrication Coordinator.
• Develop and mentor junior Engineers, foster their professional growth and knowledge development.

Qualifications

• Bachelor’s Degree S1/D4 in the field of study as follows:
  • HVAC, Mechanical Engineering, Physics Engineering
• Minimum six (6) years of experience in oil & gas and/or renewable energy fabrication and construction projects in major contractor or consultant.
• Excellent English written and verbal communication skills.
• Strong knowledge of Oil & Gas onshore / offshore construction industry.
• Strong knowledge of industry code and standards and best practices related to production processes and facilities project execution.
• Relevant training and/or certifications in Project Execution.
• Proven experience in the EPCI industry or a similar Engineering field.
• Proven track record in leading teams and managing large-scale projects.
• Excellent problem-solving skills with the ability to address complex technical challenges.
• Understand the strategy to delivering discipline-level fabrication efforts for complex projects, with multinational project team and customer.
• Strong communication skills to effectively collaborate with diverse stakeholders.
• Ability to work under pressure and meet project deadlines.
• Placement : Batam, Kepulauan Riau, Indonesia

3. Production Engineer (Mechanical Discipline)

Responsibilities

• Review project scope of work, schedules, and specifications; understand the requirements and deliverables.
• Prepare Work Package for work execution.
• Review the fabrication schedule and suggest corrections to the Planning Team and understand project critical path.
• Ensure materials, fabrications and installations are in accordance with the specifications and drawings.
• Review weekly material reports. Ensures and raises problems with material delivery.
• Initiate site/technical queries to resolve fabrication/construction issues.
• Provide field guidance as necessary and ensure compliance with Project and Company specification.
• Attend production meetings and report concerns.
• Identify any changes or additional work from the original scope and initiate change order as required.
• Review weekly fabrication progress and monitor production man-hours and productivity.
• Review two to four weeks look ahead plans and identify the constraints (material / drawings and actual construction condition).
• Liaise with Detailing and construction engineer to ensure the drawing and procedures are issued timely / all parties understand any change.
• Liaise with shop/erection supervision to ensure compliance with the project plan.
• Review drawings for creating fabrication sequence/constructability and identify any special items / subcontract requirements.
• Provide Method Statemen for any special/specific work as required.

Qualifications

• Bachelor’s Degree S1/D4 in the field of study as follows:
  • Mechanical Engineering
• Minimum four (4) years of experience in oil & gas and/or renewable energy fabrication and construction projects in major contractor or consultant.
• Excellent English written and verbal communication skills.
• Good knowledge of Oil & Gas onshore / offshore construction industry.
• Good knowledge of industry code and standards and best practices related to production processes and facilities project execution.
• Relevant training and/or certifications in Project Execution.
• Proven experience in the EPCI industry or a similar Engineering field.
• Excellent problem-solving skills with the ability to address complex technical challenges.
• Understand the strategy to delivering discipline-level fabrication efforts for complex projects, with multinational project team and customer is a plus.
• Strong communication skills to effectively collaborate with diverse stakeholders is a plus.
• Ability to work under pressure and meet project deadlines.
• Placement : Batam, Kepulauan Riau, Indonesia

4. Production Engineer (Electrical & Instrumentation Discipline)

Responsibilities

• Review project scope of work, schedules, and specifications; understand the requirements and deliverables.
• Prepare Work Package for work execution.
• Review the fabrication schedule and suggest corrections to the Planning Team and understand project critical path.
• Ensure materials, fabrications and installations are in accordance with the specifications and drawings.
• Review weekly material reports. Ensures and raises problems with material delivery.
• Initiate site/technical queries to resolve fabrication/construction issues.
• Provide field guidance as necessary and ensure compliance with Project and Company specification.
• Attend production meetings and report concerns.
• Identify any changes or additional work from the original scope and initiate change order as required.
• Review weekly fabrication progress and monitor production man-hours and productivity.
• Review two to four weeks look ahead plans and identify the constraints (material / drawings and actual construction condition).
• Liaise with Detailing and construction engineer to ensure the drawing and procedures are issued timely / all parties understand any change.
• Liaise with shop/erection supervision to ensure compliance with the project plan.
• Review drawings for creating fabrication sequence/constructability and identify any special items / subcontract requirements.
• Provide Method Statemen for any special/specific work as required

Qualifications

• Bachelor’s Degree S1/D4 in the field of study as follows:
  • Electrical Engineering, Physic Engineering, Marine Engineering.
• ⁠Minimum four (4) years of experience in oil & gas and/or renewable energy fabrication and construction projects in major contractor or consultant.
• Excellent English written and verbal communication skills.
• Good knowledge of Oil & Gas onshore / offshore construction industry.
• Good knowledge of industry code and standards and best practices related to production processes and facilities project execution.
• Relevant training and/or certifications in Project Execution.
• Proven experience in the EPCI industry or a similar Engineering field.
• Excellent problem-solving skills with the ability to address complex technical challenges.
• Understand the strategy to delivering discipline-level fabrication efforts for complex projects, with multinational project team and customer is a plus.
• Strong communication skills to effectively collaborate with diverse stakeholders is a plus.
• Ability to work under pressure and meet project deadlines.

5. Production Engineer (Structure Discipline)

Responsibilities:

• Review project scope of work, schedules, and specifications; understand the requirements and deliverables.
• Prepare Work Package for work execution.
• Review the fabrication schedule and suggest corrections to the Planning Team and understand project critical path.
• Ensure materials, fabrications and installations are in accordance with the specifications and drawings.
• Review weekly material reports. Ensures and raises problems with material delivery.
• Initiate site/technical queries to resolve fabrication/construction issues.
• Provide field guidance as necessary and ensure compliance with Project and Company specification.
• Attend production meetings and report concerns.
• Identify any changes or additional work from the original scope and initiate change order as required.
• Review weekly fabrication progress and monitor production man-hours and productivity.
• Review two to four weeks look ahead plans and identify the constraints (material / drawings and actual construction condition).
• Liaise with Detailing and construction engineer to ensure the drawing and procedures are issued timely / all parties understand any change.
• Liaise with shop/erection supervision to ensure compliance with the project plan.
• Review drawings for creating fabrication sequence/constructability and identify any special items / subcontract requirements.
• Provide Method Statemen for any special/specific work as required.

Qualifications

• Bachelor’s Degree S1/D4 in the field of study as follows:
  • Structural discipline : Civil Engineering (steel construction), Ocean/Offshore Engineering, Shipbuilding/Naval Engineering.
• Minimum four (4) years of experience in oil & gas and/or renewable energy fabrication and construction projects in major contractor or consultant.
• Excellent English written and verbal communication skills.
• Good knowledge of Oil & Gas onshore / offshore construction industry.
• Good knowledge of industry code and standards and best practices related to production processes and facilities project execution.
• Relevant training and/or certifications in Project Execution.
• Proven experience in the EPCI industry or a similar Engineering field.
• Excellent problem-solving skills with the ability to address complex technical challenges.
• Understand the strategy to delivering discipline-level fabrication efforts for complex projects, with multinational project team and customer is a plus.
• Strong communication skills to effectively collaborate with diverse stakeholders is a plus.
• Ability to work under pressure and meet project deadlines.

Bagi yang berminat dan memenuhi kualifikasi, Silahkan melakukan pendaftaran secara online.

NOTE :

• Proses apply rekrutmen ini dilakukan melalui online.
• Proses rekrutmen dilakukan tanpa biaya (GRATIS!!!).
• Harap hati-hati penipuan yang mengatasnamakan PT McDermott Indonesia, dan Cakerja.
• Join Group Telegram untuk Update Loker Setiap Harinya di  T.ME/CAKERJA 

• Batas Lamaran: -
• Link: https://cakerja.com/11196